How To Operate A PVC Granulating Line For Plasticizing

The need for high-quality equipment for manufacturing plastic items is rising daily as the plastic industry expands quickly.

Due to the rising demand for PVC (polyvinyl chloride) granules in plasticizing, the use of PVC granulating lines is now a crucial part of the plastic manufacturing process. PVC granulating line has excellent precision for plasticizing capabilities, a high rate of productivity, impact construction throughout the entire line, and high levels of automation.

In this article, we will be sharing with you on the simple steps on how to operate and use PVC granulating line equipment for the production process of plastic manufacturing. Do enjoy an informative read!

What is a PVC granulating line?

The PVC granulating line is made up of a conical dual screw extruder, a granulating machine, a hydraulic net changer, a die face cutter, vibration separating, an air transferring device, and other parts that make up the pelletizing downstream equipment.

The PVC granulating line is appropriate for granulating PVC raw materials by utilizing wood power and mixing with other additives like stabilizers, plasticizers, colorants, and lubricants. The PVC pellets made by PVC granulating machines are uniform, sturdy, and beautiful.

However, to get the best performance, it is required for you to make sure it comes from a reputable PVC granulating line manufacturer.

How to operate the PVC granulating line?

For one to efficiently know how to operate the PVC granulating production line, there are some important operational procedures that must be considered. They are crucial in the smooth running of the machine.

Here are eight procedures to consider to know how to use the PVC granulating line.

1. Avoid running the granulating machine in reverse, only run forward.

2. The action of the cooling device should be avoided by the granulating machine; instead, it is important to fill the operation to prevent the patch (hugging) phenomena.

3. Production-impacting incidents should be avoided to prevent mishaps that could harm output.

4. Pay attention to how your body's temperature changes; after touching the strip with a clean palm, you should quickly begin to warm up. Prior to holding the strip, everything is normal.

5. The speed reducer should be added and maintained when it burns or makes noise.

6. The host bearing room's bearing section is noisy or hot, necessitating a halt to the repair and the addition of butter. The bearing room lasts for over 5–6 days while it is operating well.

7. Pay attention to how the machine is operating; for example, if the temperature is high or the speed is slow, the problem can be handled accordingly.

8. It should be noted that if the fuselage is unstable, the coaxial anastomosis gap is too tight and needs to be relaxed.

Do you need a high-quality PVC granulating line and you are looking for a reliable manufacturer and supplier?

Contact us for your premium PVC granulating line

As a high-tech enterprise with decades of experience in research, manufacturing, and marketing of PVC granulating line that meet our customers' needs. You can rest assured of high quality! Kindly click here for further information on purchase.